Lists 11–3
826886~1.DOC TI-83 international English Bob Fedorisko Revised: 10/26/05 1:33 PM Printed: 10/27/05 2:50
PM Page 3 of 18
The TI-82 STATS has six list names in memory: L1, L2, L3, L4,
L5, and L6. The list names L1 through L6 are on the keyboard
above the numeric keys À through ¸. To paste one of these
names to a valid screen, press y, and then press the
appropriate key.
L1 through L6 are stored in stat list editor
columns
1 through 6 when you reset memory.
To create a list name on the home screen, follow these steps.
1. Press y [
{ ], enter one or more list elements, and then
press y [
} ]. Separate list elements with commas. List
elements can be real numbers, complex numbers, or
expressions.
2. Press ¿.
3. Press ƒ [letter from A to Z or
q
] to enter the first letter
of the name.
4. Enter zero to four letters, q, or numbers to complete the
name.
5. Press Í. The list is displayed on the next line. The list
name and its elements are stored in memory. The list name
becomes an item on the
LIST NAMES menu.
Note: If you want to view a user-created list in the stat list editor,
you must store it in the stat list editor (Chapter 12).
You also can create a list name in these four places.
• At the
Name= prompt in the stat list editor
• At an
Xlist:, Ylist:, or Data List: prompt in the stat plot editor
• At a
List:, List1:, List2:, Freq:, Freq1:, Freq2:, XList:, or
YList: prompt in the inferential stat editors
• On the home screen using
SetUpEditor
You can create as many list names as your TI-82 STATS
memory has space to store.
Naming Lists
Using
TI-82 STATS List
Names L
1
through L6
Creating a List
Name on the
Home Screen
To Next Page
Loading...
Need help?
General
