Statistics 12–17
82D315~1.DOC TI-83 international English Bob Fedorisko Revised: 10/26/05 1:36 PM Printed: 10/27/05 2:53
PM Page 17 of 38
The stat list editor has four contexts.
• View-elements context • Edit-elements context
• View-names context • Enter-name context
The stat list editor is first displayed in view-elements context.
To switch through the four contexts, select
1:Edit from the
STAT EDIT menu and follow these steps.
1. Press } to move the cursor onto a list name. You are now in
view-names context. Press ~ and | to view list names
stored in other stat list editor columns.
2. Press Í. You are now in edit-elements context. You
may edit any element in a list. All elements of the current list
are displayed in braces (
{ } )in the entry line. Press ~ and
| to view more list elements.
3. Press Í again. You are now in view-elements context.
Press ~, |, †, and } to view other list elements. The
current element’s full value is displayed in the entry line.
4. Press Í again. You are now in edit-elements context.
You may edit the current element in the entry line.
5. Press } until the cursor is on a list name, then press y
[
INS]. You are now in enter-name context.
6. Press ‘. You are now in view-names context.
7. Press †. You are now back in view-elements context.
Switching Stat List Editor Contexts
Stat List Editor
Contexts
To Next Page
Loading...
