Texas Instruments TI-82 STATS

8–14 DRAW Instructions
82CA5D~1.DOC TI-83 international English Bob Fedorisko Revised: 10/26/05 1:27 PM Printed: 10/27/05 2:36
PM Page 14 of 20
To display the DRAW POINTS menu, press y [DRAW] ~. The
TI-82 STATS interpretation of these instructions depends on
whether you accessed this menu from the home screen or the
program editor or directly from a graph.
DRAW POINTS STO
1: Pt-On( Turns on a point.
2: Pt-Off( Turns off a point.
3: Pt-Change( Toggles a point on or off.
4: Pxl-On( Turns on a pixel.
5: Pxl-Off( Turns off a pixel.
6: Pxl-Change( Toggles a pixel on or off.
7: pxl-Test( Returns 1 if pixel on, 0 if pixel off.
To draw a point on a graph, follow these steps.
1. Select
1:Pt.On( from the DRAW POINTS menu.
2. Move the cursor to the position where you want to draw the
point.
3. Press Í to draw the point.
To continue drawing points, repeat steps 2 and 3. To cancel
Pt.On(, press ‘.
Drawing Points on a Graph
DRAW POINTS
Menu
Drawing Points
Directly on a
Graph with
Pt
.On(