Texas Instruments TI-82 STATS User Manual

11–16 Lists
826886~1.DOC TI-83 international English Bob Fedorisko Revised: 10/26/05 1:33 PM Printed: 10/27/05 2:50
PM Page 16 of 18
Matr4list( (matrix stored to lists) fills each listname with
elements from each column in matrix. If the number of listname
arguments exceeds the number of columns in matrix, then
Matr4list( ignores extra listname arguments. Likewise, if the
number of columns in matrix exceeds the number of listname
arguments, then
Matr4list( ignores extra matrix columns.
Matr4list(matrix,listname1,listname2, . . . ,listname n)
&
Matr4list( also fills a listname with elements from a specified
column# in matrix. To fill a list with a specific column from
matrix, you must enter a column# after matrix.
Matr4list(matrix,column#,listname)
&
Ù
ÙÙ
Ù preceding one to five characters identifies those characters as a
user-created listname. listname may comprise letters, q, and
numbers, but it must begin with a letter from A to Z or q.
Ù
ÙÙ
Ùlistname
Generally, Ù
ÙÙ
Ù must precede a user-created list name when you
enter a user-created list name where other input is valid, for
example, on the home screen. Without the
Ù
ÙÙ
Ù, the TI-82 STATS
may misinterpret a user-created list name as implied
multiplication of two or more characters.
Ù
ÙÙ
Ù need not precede a user-created list name where a list name is
the only valid input, for example, at the
Name= prompt in the
stat list editor or the
Xlist: and Ylist: prompts in the stat plot
editor. If you enter
Ù
ÙÙ
Ù where it is not necessary, the TI-82 STATS
will ignore the entry.
LIST OPS Menu (continued)
Matr4list(

Texas Instruments TI-82 STATS Specifications

General

Type	Graphing Calculator
Display	LCD
Resolution	96 x 64 pixels
Characters	16 x 8
Processor	Zilog Z80
Programming	TI-BASIC
Memory	28 KB RAM
Power	4 AAA batteries
Connectivity	Link port