Section 6 – SR-2 Service Procedure A01A
Microprocessor/Interface Board Functional Test
Where Used
All SR-2 units
Purpose
To confirm proper operation of the microprocessor and interface board
Table of Contents
Microprocessor/Interface Board Functional Test....................................................................................................... 1
Where Used ........................................................................................................................................................... 1
Purpose.................................................................................................................................................................. 1
Table of Contents................................................................................................................................................... 1
Materials Required................................................................................................................................................. 1
Operation ............................................................................................................................................................... 1
Important Notes...................................................................................................................................................... 2
Important PC Notes ............................................................................................................................................... 2
Diagnostic Procedure............................................................................................................................................. 3
Materials Required
• Thermo King SR-2 Diagnostic Tool – Service Part Number 204-1102.
• The Thermo King SR-2 Diagnostic software installed on a pc computer.
Operation
The following procedure allows the technician to determine if the microprocessor or interface board is operating
properly using the Thermo King SR-2 Diagnostic Tool.
Page 1
P41RA01A 29 January 2005