A
Using Basic Tune Functions
Using the Mass List Table in the Define Scan Pane
Thermo Scientific TSQ Altis, Quantis, and Fortis Hardware Manual 119
Using the Mass List Table in the Define Scan Pane
The mass list table appears when you select the SIM Scan (Q1), SIM Scan (Q3), or SRM scan
type in the Define Scan pane. To set different scan parameters for the precursor ions, add the
parameters to the table.
Adding a Row to the Table
Do one of the following:
• Click the Add Row icon, .
• Right-click the table, and then choose Add Row.
Deleting a Row from the Table
1. Select the row number to highlight the entire row.
2. Do one of the following:
• Click the Delete Selected Rows icon, .
• Right-click the selected row, and then choose Delete Selected Rows.
• Press the DELETE key on your keyboard.
Deleting Multiple Rows from the Table
1. Select the first row’s number to highlight the entire row.
2. Do one of the following:
• For an adjacent row or group of sequential rows, use the SHIFT key as you make
your selections.
• For an adjacent row or non-sequential rows, use the CTRL key as you make your
selections.
3. Do one of the following:
• Click the Delete Selected Rows icon, .
• Right-click the selected row, and then choose Delete Selected Rows.
• Press the DELETE key on your keyboard.
To Next Page
Loading...
Need help?
General
