Thermo Scientific TSQ Quantis User Manual

Thermo Scientific TSQ Altis, Quantis, and Fortis Hardware Manual 81
19
Acquiring Sample Data
To manually acquire sample data, use either the Tune application or the Xcalibur data system
(Method Editor).
• Creating an SRM Method Animation
• Using Tune to Acquire Sample Data
• Using the Xcalibur Data System to Acquire Sample Data
• Using Templates in Thermo Xcalibur Instrument Setup
Creating an SRM Method Animation
1. Go to thermofisher.com.
2. In the search field, type TSQ Altis, TSQ Quantis, or TSQ Fortis.
3. Click the Catalog tab and then the instrument name.
4. Scroll down until you see the Product overview, Videos, and Documents tab.
5. Click the Videos tab and on the right, click Performing compound optimization.
Note Before you begin, check the following:
• In the Calibration pane, ensure that all calibrations are up to date.
• Connect the Ready Out cable (not provided) and the contact closure cable to help
prevent sample loss. Refer to the TSQ Altis, TSQ Quantis, and TSQ Fortis Getting
Connected Guide.

Thermo Scientific TSQ Quantis Specifications

General

Brand	Thermo Scientific
Model	TSQ Quantis
Category	Laboratory Equipment
Language	English