Thermo Scientific TSQ Altis, Quantis, and Fortis Hardware Manual 31
Using the MS Power Options
Become familiar with the power options.
•Turning the MS On
• Placing the MS in Standby Mode
• Shutting Down the MS System in an Emergency
Turning the MS On
In the Tune window, place the MS in On mode, .
The System LED on the front panel turns green.
If necessary, turn the power on to the other MS system components, such as the syringe
pump, the LC pumps, and the autosampler.
Placing the MS in Standby Mode
If you are not going to use the MS for a few days, place it in standby mode.
1. Open the Tune window.
•(Windows 7) From the Microsoft™ Windows™ taskbar choose Start > All Programs
> Thermo Instruments > model x.x > model Tun e to open the Tune window.
• (Windows 10) From the Windows taskbar, choose Start > All Apps > Thermo
Instruments > model x.x> model Tune to open the Tune window.
2. If your LC/MS system includes LC pumps, turn off the liquid flow to the API source.
For instructions, refer to the LC pump manual.
3. In the Tune window, place the MS in Standby mode, .
To Next Page
Loading...
Need help?
General
