Tibbo DS1100 - 50, C1: Mini Type B USB Port [DEPRECATED]

366Tibbo Project System (TPS)
© Tibbo Technology Inc.
This Tibbit was designed for use with the LTPP3 board, which has now been
superseded by the LTPP3(G2) board.
Since the SD card slot is present on the LTPP3(G2) board itself, this Tibbit is
not required on, nor compatible with the LTPP3(G2).
Details
Use this Tibbit in conjunction with two Tibbits #00-1.
This Tibbit is only supported on Linux-based boards, such as the LTPP3 board.
7.2.9.56
#50, C1: Mini Type B USB Port [DEPRECATED]
THIS TIBBIT HAS BEEN DEPRECATED
Function: Mini-B USB port with OTG
Form factor: C1
Special needs: [USB]
Power requirements: 5V/10mA (keep in mind that an attached USB device may
additionally consume up to 500mA)
See also: #56