Tibbo DS1100 - Connector Pin Assignment

513 Programmable Hardware Manual (PHM)
© Tibbo Technology Inc.
· Dimensions (LxWxH): 42.0 x 19.0 x 6.7mm.
· Prototyping-friendly 2.54mm (100mil) pin pitch.
· Operating temperature range: -20 ~ +70C.
· CE- and FCC-certified.
· FCC ID: XOJGA1000.
Connector pin assignment
I/O pin assignment
Pin #
Functio
n
Description
1
GND
System ground.
2
VCC
Positive power input, 3.3V nominal, +/- 5%.
3
CS
Chip select, active LOW (input*).
4
N.C.
No connection.
5
DI
SPI port, data in (input*, must be connected to DO of Tibbo
module).