485 Programmable Hardware Manual (PHM)
© Tibbo Technology Inc.
- A/D converter;
- D/A converter;
- Relays;
- RS232/485 port;
- "Left side" LEDs.
8.4.3.1
Ordering Info and Specifications
Device numbering scheme is as follows:
DS1014 devices without "G", "C", or "GC" options are not being offered by Tibbo. If
you want to purchase Ethernet-only device (without any wireless options), then
order DS1004 instead.
External Antenna
The DS1014 can be ordered with Wi-Fi, GPRS, or Wi-Fi and GPRS options. The Wi-Fi
interface works better when equipped with an antenna. In the absence of Wi-Fi
antenna, the Wi-Fi interface still works (relying on a small "chip" antenna on the
GA1000), but the operating range is reduced. The GPRS interface can't work without
the antenna at all. Therefore:
·
The DS1014G device (with Wi-Fi option) will be shipped with Wi-Fi antenna.
·
The DS1014C device (with GPRS option) will be shipped with GPRS antenna.
·
The DS1014GC device (with Wi-Fi and GPRS options) will be shipped with GPRS
antenna. The Wi-Fi interface will rely on the internal "chip" antenna and,
therefore, will have reduced range compared to the DS1014G.
Hardware specifications
DS1004: NB1000 + LB1000
DS1014: NB1000 + LB1000
DC 10-18VDC (12VDC nominal)
Operating relative humidity
To Next Page
Loading...
Need help?
General