388Tibbo Project System (TPS)
© Tibbo Technology Inc.
Size 3 Tibbo Project PCB (TPP3), Gen. 2 runs Tibbo OS and is programmable in Tibbo
BASIC and Tibbo C.
TPP3(G2) is ideal for applications that require no human-machine interface (HMI)
while calling for a significant number of I/O lines and/or functions.
The board can be used to replace dumb PLC controllers or work as a safety,
security, or access control device. The TPB3 is also ideal for factory, lab, shop,
building, hotel, and home automation projects.
Offering 7 tiles for a total of 14 "M" and 14 "C" sockets, the TPP3(G2) can be used
to construct devices with up to four full serial ports, up to 25 relays, or up to 47
opto-inputs, PWM, or open-collector outputs.
Further, the generous number of available Tibbit sockets means you can increase
your system's versatility by offering multiple power supply options, such as +5V,
+12V, PoE, etc. You can also install multiple power supply Tibbits to increase total
available power or provide power redundancy.
This product can be used as a bare board, or assembled into a size 3 Tibbo Project
Box.
Hardware features
·
32-bit architecture
·
Powered by Tibbo OS (TiOS)
·
10/100BaseT auto-MDIX Ethernet port (automatic detection of "straight" and
"cross" cables)
·
Optional Wi-Fi interface (requires the WA2000 add-on module)
·
Optional BLE interface (requires the WA2000 add-on module)
·
Optional GPRS interface (requires Tibbit #47)
·
Seven tiles with 47 general-purpose I/O lines
o Fourteen sockets for Tibbit modules
o Fourteen sockets for Tibbit connectors
o One extra socket for Tibbit #37
o Four Tibbit module sockets have UART capability
§
Baudrates of up to 460,800bps
§
None*/even/odd/mark/space parity modes
§
7*/8 bits/character
§
Full-duplex mode with RTS/CTS and XON/XOFF flow control
§
Half-duplex mode with direction control
§
Encoding and decoding of Wiegand and clock/data streams
o Eight module sockets have interrupt capability
o One module socket has four ADC lines
o One module socket has PoE capability
o Four remappable synchronous serial ports with SPI and I2C modes
·
Onboard buzzer
·
RTC with a backup supercapacitor
·
66KB SRAM for Tibbo BASIC/C variables and data
·
1MB flash for TiOS and application code
To Next Page
Loading...
Need help?
General