Dynamic routing protocols: BGP, OSPF, RIP
set ospf router-id a.b.c.d
set ospf abr-type cisco|standard
set ospf rfc1583compatibility
set ospf log-adjacency-changes [detail]
set ospf passive-interface <interface>
set ospf timers throttle spf delay initial-holdtime max-holdtime
set ospf network a.b.c.d/m area a.b.c.d
set ospf network a.b.c.d/m area <0-4294967295>
set ospf neighbor A.B.C.D
set ospf neighbor A.B.C.D poll-interval <1-65535>
set ospf neighbor A.B.C.D poll-interval <1-65535> priority <0-255>
set ospf neighbor A.B.C.D priority <0-255>
set ospf neighbor A.B.C.D priority <0-255> poll-interval <1-65535>
set ospf area a.b.c.d stub
set ospf area a.b.c.d stub no-summary
set ospf area <0-4294967295> stub no-summary
set ospf area a.b.c.d default-cost <0-16777215>
set ospf area a.b.c.d filter-list prefix NAME in
set ospf area a.b.c.d filter-list prefix NAME out
set ospf area <0-4294967295> filter-list prefix NAME in
set ospf area <0-4294967295> filter-list prefix NAME out
set ospf redistribute (kernel|connected|static|rip|bgp)
set ospf redistribute (kernel|connected|static|rip|bgp) route-map
set ospf redistribute (kernel|connected|static|rip|bgp) metric-type (1|2)
set ospf redistribute (kernel|connected|static|rip|bgp)
set ospf metric-type (1|2) route-map word
set ospf redistribute (kernel|connected|static|rip|bgp) metric <0-16777214>
set ospf redistribute (connected|static|rip|bgp) metric <0-16777214> route-map
wrd
set ospf redistribute(connected|static|rip|bgp) metric-type (1|2) metric <0-16777214>
set ospf redistribute (connected|static|rip|bgp) metric-type (1|2) metric <0-16777214> route-map
word
set ospf default-information originate
set ospf default-information originate metric <0-16777214>
set ospf default-information originate metric <0-16777214> metric-type (1|2)
set ospf default-metric <0-16777214>
set ospf distance <1-255>
set ospf route-map <name> permit <seq> set metric <0-4294967295>
set ospf route-map <name> permit <seq> set metric-type type-2
To Next Page
Loading...
Need help?
General
