Tiesse Imola LX 5200 User Manual

Configuration examples
USER GUIDE
365
set eth1 ipaddr 192.168.1.254 netmask 255.255.255.0
set eth1 on
set gprs apn ibox.tim.it
set gprs auto-network
set gprs idle 0
set gprs rx-idle 1800
set gprs masquerade
set gprs default-route
set gprs mtu 1500
set gprs usepeerdns
set gprs debug
set gprs vjc
set gprs sgauth 1
set gprs speed 230400
set gprs pwroff-modem
set gprs on
GPRS ON PRIVATE APN WITH GRE TUNNEL
It is described here a base configuration of the GPRS interface with a connection profile based on a
private APN, with a management IP address on the eth0 and a private IP on the eth1 LAN. The
private internal LAN connection, with the Master in its center, is being realized with a GRE tunnel
(keepAlive), with a default route.
To have the tunnel work correctly, the IP address released by the mobile interface must be static.
set eth0 ipaddr 10.10.113.1 netmask 255.255.255.252
set eth0 on
set eth1 ipaddr <PRIVATE-IP> netmask <NETMASK-IP-PRIVATE>
set eth1 on
set gprs apn <PRIVATE-APN>
set gprs login <APN-USER> password <APN-PASSWORD>
set gprs idle 0
set gprs rx-idle 1800
set gprs mtu 1476
set gprs usepeerdns
set gprs debug
set gprs vjc
set gprs no-default-route
set gprs no-masquerade
set gprs speed 230400
set gprs pwroff-modem
set gprs no-sms-handle
set gprs on

Tiesse Imola LX 5200 Specifications

General

Brand	Tiesse
Model	Imola LX 5200
Category	Network Router
Language	English