Tiesse Imola LX 5200 User Manual

Configuration examples
USER GUIDE
375
set tacacs on
It is possible to specify more than one server:
set tacacs authhost 192.168.1.1 192.168.1.2
For Accounting activation:
set tacacs do-accounting
To authorize:
set tacacs do-authorization
RADIUS CONFIGURATION
set radius authhost <ip-address-server>
set radius accthost <ip-address-server>
set radius retries 2
set radius timeout 1
set radius secret <ip-address-server> <password>
set radius source loopback
set radius on
The default port used for the Authentication requests is 1812, while 1813 is used for the
accounting ones
It is possible to specify more than one server and to use a different port from the default ones,
using:
set radius authhost 192.168.1.1:1645 192.168.1.2:1645
set radius accthost 192.168.1.1:1646 192.168.1.2:1646
BANNER CONFIGURATION
To set a system banner on a Tiesse's router you have to use commands having the following syntax:
set banner <STRING_1>
: :
set banner <STRING_N>
set banner on
This makes up a sequence of directives with which it builds the page to display on the apparatus
during remote access to the router.
With set banner on, the router activates the banner display mode and makes it visible during
external access authenticated via RADIUS or Tacacs. If you need to show the banner after the user
authentication, use
set banner-exec
instead of set banner
The following example is about a generic template useful for the construction of an own banner:
set banner .
set banner .

Tiesse Imola LX 5200 Specifications

General

Brand	Tiesse
Model	Imola LX 5200
Category	Network Router
Language	English