set voip user-terminal-group create goofy
set voip user-terminal-group pluto hunting-mode ordered
set voip user-terminal-group pluto hunting-scan oneshot
set voip user-terminal-group pluto timerprionoreplay 10
set voip user-terminal-group pluto add pots2
set voip user-terminal-group pluto add pots1
set voip user-terminal-group pluto enable yes
set voip call-mng inbound opensip2pluto source-trunk opensip destination pluto incoming-number all-number
Line-hunting ordered/circular
The Line Policy expects the hunting-mode to be ordered and the hunting-scan to be circular.
Every incoming call will be always routed to the first terminal associated with the Line Group (pots2
as in the example below).
After a first ring cycle is completed and it has not obtained an answer, other two cycle will start.
The configuration is implemented using the command enable.
The inbound rule hijacks an incoming call from a trunk to the Line Group (the SIP trunk is opensip
as in the example below):
set voip user-terminal-group create goofy
set voip user-terminal-group pluto hunting-mode ordered
set voip user-terminal-group pluto hunting-scan circular
set voip user-terminal-group pluto timerprionoreplay 10
set voip user-terminal-group pluto add pots2
set voip user-terminal-group pluto add pots1
set voip user-terminal-group pluto enable yes
set voip call-mng inbound opensip2pluto source-trunk opensip destination pluto incoming-number all-number
Line-hunting round-robin/oneshot
The Line Policy expects the hunting-mode to be round-robin and the hunting-scan to be
oneshot.
Every new incoming call will be routed alternately to pots2 and pots1.
After a first ring cycle is completed and it has not obtained an answer, the call will be rejected.
The configuration is implemented using the command enable.
The inbound rule hijacks an incoming call from a trunk to the Line Group (the SIP trunk is opensip
as in the example below):
set voip user-terminal-group create pluto
set voip user-terminal-group pluto hunting-mode round-robin
set voip user-terminal-group pluto hunting-scan oneshot
set voip user-terminal-group pluto timerprionoreplay 10
set voip user-terminal-group pluto add pots2
set voip user-terminal-group pluto add pots1
set voip user-terminal-group pluto enable yes