Tiesse Imola LX 5200 User Manual

SHDSL interface
USER GUIDE
76
Firmware Version: G119
Remote Country Code 0x00B5 (181)
Remote Provider Code PNGS
Remote FW Version 0x0042 (66)
Line 0 Status
Actual rate: 2312 kbps
Transmit Power: 9.5 dBm
Receiver Gain: 21.86 dB
Loop Attenuation 0.0 dB
SNR (SQ Mean): 41.24 dB
DSL Framer Status
Last 1 Sec. Errors
CRC Errors: 0
SEGment Anomaly Errors: 0
LOSs of Signal Errors: 0
ATM Framer Status
Received Cells: 4160
Transmitted Cells: 13890
Dropped Cells: 0
HEC on Received Cells: 0
Modem Status: DATA Mode (for 10 hr, 1 min, 54 sec)
It is also possible to display OAM cells through the command:
show interface shdsl oam
SHDSL LEDS MEANING
In Imola4 routers the interface status is indicated by 2 green LEDs named Link and Data.
LED type
LED
COLOR
BEHAVIOUR
DESCRIPTION
SHDSL interface
Link
Green
On
The SHDSL modem is correctly
powered and initialized
Data
Green
Blinking
Shows the sync phase with the central
Steady on
The sync phase was successful
SHDSL TRIGGER
It is possible to define actions to execute when the SHDSL interface is activated or deactivated using
the following commands:
set trigger shdsl up <action>
set trigger shdsl down <action>

Tiesse Imola LX 5200 Specifications

General

Brand	Tiesse
Model	Imola LX 5200
Category	Network Router
Language	English