Tiesse Imola LX 5200 User Manual

USER GUIDE
3
SAFETY INSTRUCTIONS
Use exclusively the power kit supplied. Plug the power directly into a wall socket properly earthed.
In case of a model without the ON/OFF switch, place the device as close as possible to the 230V
wall outlet. The mains plug must be easily accessible. To turn off the router, power connection
must be removed from the wall outlet.
Do not place the system where the power cable can be stepped on.
Do not place objects on the power cable.
If you need to disconnect the power for installation jobs, be sure to unplug the power
from the wall socket.
GSM antennas and / or Wi-Fi, where the router model requires their use, must not be placed in a
stable manner at a distance of less than 20 cm from all persons.
In case of a model equipped with rear bush for grounding (see picture): connect the device to the
power system ground via lug and yellow-green cable.
SIM INSERTION/EXTRACTION
(Only for models in which it is provided)
Please, refer to the SIM Installation User Guide, available on Tiesse's website: http://www.tiesse.com
CAUTION! Before removing the cover:
 Turn off the device
 Unplug the telecommunication cables (xDSL, ISDN)
 Unplug the power cable from the wall socket
 Unplug GSM or Wi-Fi aerials if present
After you worked on the router:
 Close the device and secure the cover as shown in the instructions
 Plug the power cable into the wall socket
 Plug the telecommunication cables (xDSL, ISDN)
 Plug GSM or Wi-Fi aerials if present
 Turn on the device
IF THE ROUTER DOESN’T WORK
 Do not intervene, in any way, on the device
 Contact Tiesse via e-mail at support@tiesse.com to begin the process of repair or
replacement under warranty.

Tiesse Imola LX 5200 Specifications

General

Brand	Tiesse
Model	Imola LX 5200
Category	Network Router
Language	English