Tiesse Imola LX 5200 User Manual

ADSL interface
USER GUIDE
65
FEC (Interl/Latency-0): 64572 0
FEC (Fast/Latency-1): 0 0
HEC (Interl/Latency-0): 55677 0
HEC (Fast/Latency-1): 0 0
No cell delineation (Bearer-1): yes none
Atm Cell Counter Statistics
---------------------------------------------------------------------------
Rx Tx
Total Cell Count (Bearer-0): 1809151150 229435580
Total Cell Count (Bearer-1): 0 0
User Total Cell Count (Bearer-0): 555032 563454
User Total Cell Count (Bearer-1): 0 0
---------------------------------------------------------------------------
Current modem state: SHOWTIME (for 1 day, 8 hr, 32 min, 57 sec)
OAMPING COMMAND
Through the oamping command it is possible to check the connection status by sending an F5 OAM
cell. Here follows an example usage:
root@TLC-GTW> oamping flow 5 vpi 8 vci 35
seq 0 response from vpi-vci 8-35 time=28.0 ms
seq 1 response from vpi-vci 8-35 time=27.6 ms
seq 2 response from vpi-vci 8-35 time=28.8 ms
It is possible to specify the cell number to send:
root@TLC-GTW> oamping flow 5 vpi 8 vci 35 count 8
seq 0 response from vpi-vci 8-35 time=27.2 ms
seq 1 response from vpi-vci 8-35 time=27.6 ms
seq 2 response from vpi-vci 8-35 time=27.7 ms
seq 3 response from vpi-vci 8-35 time=29.3 ms
seq 4 response from vpi-vci 8-35 time=27.7 ms
seq 5 response from vpi-vci 8-35 time=28.5 ms
seq 6 response from vpi-vci 8-35 time=27.6 ms
seq 7 response from vpi-vci 8-35 time=28.2 ms

Tiesse Imola LX 5200 Specifications

General

Brand	Tiesse
Model	Imola LX 5200
Category	Network Router
Language	English