Tiesse Imola LX 5200 User Manual

Dynamic routing protocols: BGP, OSPF, RIP
USER GUIDE
207
route-map <name> permit|deny <seq> set aggregator as <1-4294967295> A.B.C.D
route-map <name> permit|deny <seq> set as-path exclude.<1-4294967295>
route-map <name> permit|deny <seq> set as-path prepend.<1-4294967295>
route-map <name> permit|deny <seq> set atomic-aggregate
route-map <name> permit|deny <seq> set community.AA:NN
route-map <name> permit|deny <seq> set community none
route-map <name> permit|deny <seq> set extcommunity rt.ASN:nn_or_IP-address:nn
route-map <name> permit|deny <seq> set extcommunity soo.ASN:nn_or_IP-address:nn
route-map <name> permit|deny <seq> set ip next-hop A.B.C.D
route-map <name> permit|deny <seq> set ip next-hop peer-address
route-map <name> permit|deny <seq> set local-preference <0-4294967295>
route-map <name> permit|deny <seq> set metric <+/-metric>
route-map <name> permit|deny <seq> set metric <0-4294967295>
route-map <name> permit|deny <seq> set origin (egp|igp|incomplete)
route-map <name> permit|deny <seq> set originator-id A.B.C.D
route-map <name> permit|deny <seq> set pathlimit ttl <1-255>
route-map <name> permit|deny <seq> set weight <0-4294967295>
route-map <name> permit|deny <seq> match as-path WORD
route-map <name> permit|deny <seq> match community (<1-99>|<100-500>|WORD)
route-map <name> permit|deny <seq> match community (<1-99>|<100-500>|WORD) exact-match
route-map <name> permit|deny <seq> match extcommunity (<1-99>|<100-500>|WORD)
route-map <name> permit|deny <seq> match ip address (<1-199>|<1300-2699>|WORD)
route-map <name> permit|deny <seq> match ip address prefix-list WORD
route-map <name> permit|deny <seq> match ip next-hop (<1-199>|<1300-2699>|WORD)
route-map <name> permit|deny <seq> match ip next-hop prefix-list WORD
route-map <name> permit|deny <seq> match ip route-source (<1-199>|<1300-2699>|WORD)
route-map <name> permit|deny <seq> match ip route-source prefix-list WORD
route-map <name> permit|deny <seq> match metric <0-4294967295>
route-map <name> permit|deny <seq> match origin (egp|igp|incomplete)
route-map <name> permit|deny <seq> match pathlimit as <1-65535>
route-map <name> permit|deny <seq> match peer (A.B.C.D|X:X::X:X)
route-map <name> permit|deny <seq> match peer local
The command
set bgp no-<option>
erases from the configuration the specified parameter.
To enable BGP protocol the command is:
set bgp on
To stop or disable BGP protocol, use:
set bgp off

Tiesse Imola LX 5200 Specifications

General

Brand	Tiesse
Model	Imola LX 5200
Category	Network Router
Language	English