Tiesse Imola LX 5200 User Manual

Dynamic routing protocols: BGP, OSPF, RIP
USER GUIDE
209
root@IMOLA> show ip bgp neighbor
BGP neighbor is 88.58.10.245, remote AS 3269, local AS 65201, external link
BGP version 4, remote router ID 0.0.0.0
BGP state = Active
Last read 00:00:52, hold time is 180, keepalive interval is 60 seconds
Message statistics:
Inq depth is 0
Outq depth is 0
Sent Rcvd
Opens: 0 0
Notifications: 0 0
Updates: 0 0
Keepalives: 0 0
Route Refresh: 0 0
Capability: 0 0
Total: 0 0
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
Community attribute sent to this neighbor(both)
0 accepted prefixes
Connections established 0; dropped 0
Last reset never
Next connect timer due in 74 seconds
Read thread: off Write thread: off
When the router connection has been established it displays:
BGP neighbor is 88.58.10.245, remote AS 3269, local AS 65201, external link
BGP version 4, remote router ID 172.31.34.79
BGP state = Established, up for 00:00:16
Last read 00:00:15, hold time is 180, keepalive interval is 60 seconds
Neighbor capabilities:
4 Byte AS: advertised and received
Route refresh: advertised and received(old & new)
Address family IPv4 Unicast: advertised and received
Message statistics:
Inq depth is 0
Outq depth is 0
Sent Rcvd
Opens: 1 1
Notifications: 0 0
Updates: 1 6
Keepalives: 2 1
Route Refresh: 0 0
Capability: 0 0
Total: 4 8
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
Community attribute sent to this neighbor(both)
6 accepted prefixes

Tiesse Imola LX 5200 Specifications

General

Brand	Tiesse
Model	Imola LX 5200
Category	Network Router
Language	English