LEVANTO MODELS
Levanto models are functionally equivalent to Lipari‟s, the difference is about the RS232 ports that
Levanto have, which are used to connect serial devices like RTU, SCADA, etc.
Levanto 410 has a 3G port, a Ethernet port and a DB9 DCE serial port; in the factory configuration,
the serial port is used as console.
Levanto 441 has a 4G port, a Ethernet port and four RJ45 serial ports; it is equipped with an
external power supply AC/DC 5VDC/1A type. The serial port 1 (the first on the right) is used as
console while the others (2 – 3 and 4) are used to do the conversion from serial to TCP/IP.
To Next Page
Loading...
Need help?
General
