Tiesse Imola LX 5200 User Manual

VoIP configuration
USER GUIDE
339
Last reload: 32 minutes, 56 seconds
root@imola-pbx>
FXS and BRI ports status (userterminals only) or status of the specified ports, previously
created.
show voip userterminals [pots] [bri] [pots1]
root@imola-pbx> show voip userterminals
fxs 0 state off-hook, codec alaw, extension 082310011
fxs 1 state on-hook , codec not available, extension not available
fxs 2 state on-hook , codec not available, extension not available
fxs 3 state on-hook , codec not available, extension not available
BEGIN PORT LIST:
* Port 1 Type NT PTP BC type mISDN_BC
* Port state ERROR L1 state DOWN L2 state tei(0):RELEASED
* Number of B-channels: 2
* B1 alloc:FREE state:BC_UNINITIALIZED use count: 0 sock: -1 activated:0 mode:TXRX-off
* BC0 ridx:1 dropped=0
* B2 alloc:FREE state:BC_UNINITIALIZED use count: 0 sock: -1 activated:0 mode:TXRX-off
* BC1 ridx:1 dropped=0
* Debug:0
**********************************
root@imola-pbx>
root@imola-pbx> show voip userterminals pots1
fxs 0 state off-hook, codec alaw, extension 082310011
root@imola-pbx>
root@imola-pbx> show voip userterminals bri2
* Port 2 Type NT PTP BC type mISDN_BC
* Port state ERROR L1 state DOWN L2 state tei(0):RELEASED
* Number of B-channels: 2
* B1 alloc:FREE state:BC_UNINITIALIZED use count: 0 sock: -1 activated:0 mode:TXRX-off
* BC0 ridx:1 dropped=0
* B2 alloc:FREE state:BC_UNINITIALIZED use count: 0 sock: -1 activated:0 mode:TXRX-off
* BC1 ridx:1 dropped=0
* Debug:-5
root@imola-pbx>

Tiesse Imola LX 5200 Specifications

General

Brand	Tiesse
Model	Imola LX 5200
Category	Network Router
Language	English