Recording Data
7-3
P/N: 1023998-01
Collecting Data
To use these log parameters after pressing the MINTER, select Use for MINTER & AFRM
(
Figure 7-2).
Figure 7-2: Context Menu of Logs Tab
8. Click OK to save all changes.
Using the MINTER, you can start logging one or more files. By default, clicking the Power button three
times in a row within two seconds will log a file. This file is called File A (
Figure 7-4). By default, the
Use for MINTER & AFRM check box is enabled only for File A. You can select this check box for any
number of files. In this case, clicking the Power button will simultaneously start those files for which
the Use for MINTER & AFRM check box is enabled. The current logging files are displayed in the
Logs tab (
Figure 7-3).
Figure 7-3: Logs Tab
To start recording data to the selected file with default settings do the following.
1. Right click on the desired file to open the context menu.
To Next Page
Loading...
