Topcon IS Series - Remote Elevation Measurement (REM) without Prism Height

98
5 PROGRAM MODE
2)Without prism height input
1 Press the [REM] icon.
2 Select the [NO] button.
3 Collimate prism.
4 Press the [Meas Prism] key.
5 Press the [SET] key.
6 Collimate ground point G.
7 Press the [Meas Ground] key.
8 Press the [SET] key.
9 Collimate target K.
Vertical angle(VA) and Vertical distance(VD)
will be shown.