Multi Pro 1750Page 7 − 24Drive Train
13.Loosen and remove four (4) flange head screws. Re-
move R.H. axle shaft assembly from transaxle case.
1
2
1. Flange head screw (4) 2. R.H. Axle shaft assy.
Figure 24
14.Remove differential gear assembly together with
fork shaft assembly.
1
2
1. Differential gear assy. 2. Fork shaft assy.
Figure 25
15.Remove washer from inside of transaxle case.
NOTE: Washer may stick to fork shaft when removed
in step 14.
1
1. Washer
Figure 26
To Next Page
Loading...
