Features and Functions 119
Features and Functions
With the TopAccess web-based device management utility in the administrator mode, you can
configure
and device settings, display and filter message and job logs, and control current jobs using a
web browser.
About Setup from TopAccess
Following setup options are performed from TopAccess in the administrator mode:
Configuring device settings
An administrator can configure the device settings such as device information, energy save,
date and time, and language for TopAccess web utility.
Configuring network settings
An administrator can configure the network settings such as TCP/IP, IPX/SPX, AppleTalk, Bon-
jour, LDAP Session, DNS Session, DDNS Session, SMB Session, NetWare Session, HTTP Net-
work Service, SMTP Client, SMTP Server, POP3 Network Service, SNTP Service, FTP Client,
FTP Server, SNMP Network Service, Security Service, Web Service, and LLTD Service.
Configuring copier settings
An administrator can configure the default copier settings such as color mode, original mode for
color, original mode for black, exposure for color, exposure for black, bypass feed, book > 2,
magazine sort, 2in1/4in1, maximum copies, auto 2-sided mode, and sorter mode priority.
Configuring fax settings
An administrator can configure the facsimile device settings such as terminal ID, fax number,
line 2 number, ringer volume, monitor volume, completion tone volume, reception mode, remote
RX, dial type, dial type (line 2), line-2 mode, resolution, original mode, exposure, TTI, RTI, ECM,
discard, reduction, duplex print, rotate sort, recovery transmit, journal auto print, memory trans-
mission report, multi transmission report, polling report, and relay originator.
The fax settings are available only when the fax option is installed on this equipment.
Configuring save as file settings
An administrator can configure the save as file settings such as storage maintenance, destina-
tion, remote 1, remote 2, N/W-Fax destination, and N/W-Fax folder.
Configuring Email settings
An administrator can configure the Email settings such as from address, from name, file format,
fragment message size, and default body strings.
Configuring Internet Fax settings
An administrator can configure the Internet Fax settings such as from address, from name, file
format, fragment page size and default body strings.
Configuring printer settings
An administrator can configure the default printer settings such as number of days to save pri-
vate, proof and invalid jobs, duplex printing, default paper size, default paper type, default orien-
tation, default stapling, default output tray, PCL form line, PCL font pitch, PCL font point size,
PCL font number, auto paper size conversion, and print startup page.
To Next Page
Loading...
Need help?
General
