Setting up from TopAccess 129
Setting up the Energy Save
You can set the time to enter the Auto Clear, Auto Power Save and Auto Power Off mode.
1) Auto Clear
Select how long this equipment can remain inactive before the Touch Panel Display auto-
matically returns to the default display and settings.
2) Auto Power Save
Select how long this equipment can remain inactive before entering the power save mode.
3) Sleep/Auto Shut Off
Select how long this equipment can remain inactive before entering the sleep mode or auto
shut off mode.
Setting up the Time and Date
You can set the date, time, time zone, and date format. You can also enable the daylight mode.
1) Date/Time
To adjust the date, select year in the first field, select month in the second field, and enter
date in the third field.
To adjust the time, enter hour in the fourth field, and enter time in the fifth field.
2) Time Zone
Select the time zone where this equipment is located.
3) Date Format
Select the date format.
4) Daylight Mode
Select “ON” to set the daylight saving time system.
1
2
3
1
2
3
4
To Next Page
Loading...
Need help?
General
