Setting up from TopAccess 139
Setting up the Bonjour
In Bonjour, you can enable or disable the Bonjour networking that is available for Mac OS X.
1) Enable Bonjour
Select whether the Bonjour is enabled or disabled.
2) Link-Local Host Name
Enter the DNS host name of this equipment.
3) Service Name
Enter the device name of this equipment that will be displayed in the Bonjour network.
Setting up the LDAP Session
In LDAP Session, you can enable or disable the LDAP directory service.
1) Enable LDAP
Select whether the LDAP directory service is enabled or disabled.
2) Enable SSL
Select whether the SSL (Secure Sockets Layer) is enabled or disabled for communicating
the LDAP directory service.
- Disable
— Select this to disable the SSL for communicating the LDAP directory service.
- Verify with imported cert — Select this to enable the SSL using the imported CA certif-
icate.
- Accept all certificates without CA — Select this to enable the SSL without using
imported CA certificate.
1
2
3
1
2
3
4
To Next Page
Loading...
Need help?
General
