7 TopAccess Administrator Mode
178 Setting up from TopAccess
Setting up Save as file Settings
In the Save as file submenu page in the Setup menu, an administrator can configure the Save
as file settings that apply to the Save as file operations. An administrator also configures the
Save as file settings that apply to the Save as file operation using the N/W-Fax driver.
Some settings may not apply to the Touch Panel Display as soon as you save the settings. The
settings will be updated by pressing the [FUNCTION CLEAR] button on the Control Panel or
after an Auto Clear time period.
Setting the Save as file settings
1
Access TopAccess in the administrator mode.
P.122 “Accessing TopAccess Administrator Mode”
2
Click the Setup menu and Save as file submenu.
y The Save as file submenu page is displayed.
3
In the Save as file submenu page, set the Save as file settings as
required.
y In the Save as file submenu page, you can set the following:
P.179 “Setting up the Local Storage Path”
P.180 “Setting up the Storage Maintenance”
P.180 “Setting up the Destination”
P.181 “Setting up the Remote 1 and Remote 2”
P.182 “Setting up the N/W-Fax Destination”
P.183 “Setting up the N/W-Fax Folder”
To Next Page
Loading...
Need help?
General
