Setting up from TopAccess 127
Setting up the Device Information
You can set the device information displayed in the Device tab page.
1) Name
This displays the equipment’s device name.
2) Copier Model
This displays the equipment’s model name.
3) Save as File Space Available
This displays the available size to store the Save as file documents.
4) Store to e-Filing Space Available
This displays the available size to store the e-Filing documents.
5) Fax Transmission Space Available
This displays the available size to send the fax data. This is displayed only when the fax unit
is installed.
6) Fax Reception Space Available
This displays the available size to receive the fax data. This is displayed only when the fax
unit is installed.
7) Work Space Available
This displays the percentages of available hard disk space to store the temporary data.
8) Department Code
Select whether the department management is enabled or disabled.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
To Next Page
Loading...
Need help?
General
