Setting up from TopAccess 125
Setting up from TopAccess
This section describes how to set up the equipment using TopAccess.
P.125 “Setting up Device Settings”
P.130 “Setting up Network Settings”
P.170 “Setting up Copier Settings”
P.173 “Setting up Fax Settings”
P.178 “Setting up Save as file Settings”
P.184 “Setting up Email Settings”
P.187 “Setting up Internet Fax Settings”
P.189 “Setting up Printer Settings”
P.195 “Setting up Print Service Settings”
P.201 “Displaying Version Information”
The paper size for each drawer cannot be set from TopAccess. Please set from the touch panel
of the equipment. For instructions on how to set the paper size for each drawer, please refer to
the Operator’s Manual For Basic Functions.
Setting up Device Settings
In the General submenu page in the Setup menu, an administrator can configure the general
settings such as Device Information, Energy Save, Date and Time, and Web General Setting.
Some settings may not apply to the Touch Panel Display as soon as you save the settings. The
settings will be updated by pressing the [FUNCTION CLEAR] button on the Control Panel or
after an Auto Clear time period.
Setting the device settings
1
Access TopAccess in the administrator mode.
P.122 “Accessing TopAccess Administrator Mode”
2
Click the Setup menu and General submenu.
y The General submenu page is displayed.
To Next Page
Loading...
Need help?
General
