7 TopAccess Administrator Mode
122 Accessing TopAccess Administrator Mode
Accessing TopAccess Administrator Mode
TopAccess, web-based utility available on this equipment, allows you to manage this equipment
remotely via the Internet or via your company’s intranet.
To operate TopAccess, this equipment should be connected to the network and configured with
the TCP/IP settings. After you complete the TCP/IP setup, you can access to the TopAccess
web site to operate various functions from your computer using a Web browser such as Firefox
and Internet Explorer.
You can use the TopAccess web-based utility from a Windows, Macintosh or UNIX operating
system environment. The following browsers are supported:
Windows
y Internet Explorer 5.5 Service Pack 2 or later
(Internet Explorer 7.0 or later when IPv6 is used)
y Firefox 1.5.0.4 or later
Macintosh
y Safari 2.0 or later
y Firefox 1.5.0.4 or later
UNIX
y Firefox 1.5.0.4 or later
Accessing TopAccess in the administrator mode
You can access the web utility TopAccess by your entering its URL on the address box of web
browser. To access it under a Windows Vista environment, confirm the network connection sta-
tus on the Network Map with the LLTD (= Link Layer Topology Discovery) feature of Windows
Vista, and then click the displayed icon of this equipment.
This section describes how to access it as a result of your entering its URL on the address box
of web browser.
For instruction on how to access it from the Network Map of Windows Vista, see P.17
“Accessing TopAccess from Network Map (Windows Vista)”. The procedure after displaying the
TopAccess web page is the same as that in other OSs.
To Next Page
Loading...
Need help?
General
