Setting up User Management 281
— Enabling LDAP Authentication
To enable the LDAP Authentication, you must have LDAP directory service in your network.
y Before enabling the LDAP Authentication, please see “Setting up LDAP Authentication Ser-
vice” in the Network Administration Guide.
y To enable LDAP with SSL, please see the following section.
P.139 “Setting up the LDAP Session”
Enabling LDAP Authentication
1
Click the User Management tab and the Authentication menu.
y The login page is displayed.
2
Enter the administrator password and click [Login].
y The Authentication page is displayed.
3
Click [User Management Setting].
y The User Management Setting page opens.
To Next Page
Loading...
Need help?
General
