7 TopAccess Administrator Mode
130 Setting up from TopAccess
Setting up the Web General Setting
You can set the displayed language of TopAccess, and session timer to automatically log out
from the administrator mode.
1) WEB Language
Select the displayed language of TopAccess.
2) Session Timer
Enter how long you want this equipment to preserve the session data of TopAccess. You
can enter any integer between 5 to 999. This setting also applies to the session data of e-Fil-
ing web utility.
Setting up Network Settings
In the Network submenu page in the Setup menu, an administrator can configure the network
settings such as TCP/IP, IPX/SPX, AppleTalk, Bonjour, LDAP Session, DNS Session, DDNS
Session, SMB Session, NetWare Session, HTTP Network Service, SMTP Client, SMTP Server,
POP3 Network Service, SNTP Service, FTP Client, FTP Server, SNMP Network Service, and
Security Service.
Setting the network settings
1
Access TopAccess in the administrator mode.
P.122 “Accessing TopAccess Administrator Mode”
2
Click the Setup menu and Network submenu.
y The Network submenu page is displayed.
1
2
To Next Page
Loading...
Need help?
General
