7 TopAccess Administrator Mode
170 Setting up from TopAccess
Setting up the LLTD Setting
Enable this setting for confirming the device connection status, installing devices or accessing
the TopAccess.
This setting also allows you to discover the desired device over the local network and view
device information such as location, IP address, MAC address or profile on the Network Map
under the Windows Vista environment.
1) Enable LLTD
Select whether the LLTD setting is enabled or disabled.
- Enable
: Enables the LLTD.
- Disable: Disables the LLTD.
2) Device Name
Enter a device name to be displayed on the Network Map. You can enter up to 16 characters
for the device name.
Setting up Copier Settings
In the Copier submenu page in the Setup menu, an administrator can configure the copier set-
tings that initially apply to copy operations.
Some settings may not apply to the Touch Panel Display as soon as you save the settings. The
settings will be updated by pressing the [FUNCTION CLEAR] button on the Control Panel or
after an Auto Clear time period.
Setting the copier settings
1
Access TopAccess in the administrator mode.
P.122 “Accessing TopAccess Administrator Mode”
2
Click the Setup menu and Copier submenu.
y The Copier submenu page is displayed.
1
2
To Next Page
Loading...
Need help?
General
