Setting up from TopAccess 187
Setting up Internet Fax Settings
In the Internet Fax submenu page in the Setup menu, an administrator can configure the Inter-
net Fax settings needed for Internet Fax transmissions.
Some settings may not apply to the Touch Panel Display as soon as you save the settings. The
settings will be updated by pressing the [FUNCTION CLEAR] button on the Control Panel or
after an Auto Clear time period.
Setting the Internet Fax settings
1
Access TopAccess in the administrator mode.
P.122 “Accessing TopAccess Administrator Mode”
2
Click the Setup menu and Internet Fax submenu.
y The Internet Fax submenu page is displayed.
3
In the Internet Fax submenu page, set the Internet Fax settings as
required.
y To set the Internet Fax Settings, see the following:
P.188 “Setting up the Internet Fax Settings”
4
Click [Save].
y The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel].
Clicking [Cancel] cannot restore the defaults. This can only clear the changes and
restore the current settings before saving the changes.
To Next Page
Loading...
Need help?
General
