7 TopAccess Administrator Mode
126 Setting up from TopAccess
3
In the General submenu page, set the device settings as required.
y In the General submenu page, you can set the following:
P.127 “Setting up the Device Information”
P.129 “Setting up the Energy Save”
P.129 “Setting up the Time and Date”
P.130 “Setting up the Web General Setting”
4
Click [Save].
y The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel].
Clicking [Cancel] cannot restore the defaults. This can only clear the changes and
restore the current settings before saving the changes.
5
Click [OK] to apply the changes.
When using the Internet Explorer, the settings that are displayed in each field may not be
changed even if you change the settings and click [Save]. However, the settings have
been changed in the equipment. In that case, click the General submenu then the page
displays the current settings in each field.
To Next Page
Loading...
Need help?
General
