7 TopAccess Administrator Mode
140 Setting up from TopAccess
y When “Verify with imported cert” is selected, you must import the CA certificate in this
equipment.
P.157 “Setting up the Security Service”
y If at least one of the registered LDAP directory services requires the SSL, you must
enable the “Enable SSL” option. When the “Enable SSL” option is enabled, this equip-
ment will connect the registered LDAP directory services using SSL first. Then if the con-
nection fails using SSL, this will connect to the registered LDAP directory service without
using SSL. Therefore, even if you enable the “Enable SSL” option, this equipment can
also connect to the LDAP directory service that the SSL is not required.
y The SSL port number can be set for each LDAP directory service when it is registered.
P.214 “Managing Directory Service”
y Not all operating systems support SSL for all protocols.
3) Attribute 1
Enter the name of the schema corresponding to the LDAP server configuration.
4) Attribute 2
Enter the name of the schema corresponding to the LDAP server configuration.
To Next Page
Loading...
Need help?
General
