Setting up from TopAccess 157
3) Read Write Community
Enter the SNMP Read Write community name for the SNMP access.
y If you specify a community name other than “private” for the Read Write Community, the
applications that use MIB (TopAccessDocMon, TWAIN driver, File Downloader, and
Address Book Viewer) will be unavailable. The SNMP communication of the printer
driver also will be unavailable, so that the obtaining the configurations, confirming the
department code, and obtaining the available boxes in e-Filing will be disabled.
y When you set the “Read Write Community” option blank, the SNMP communication
between the SNMP Browser of Client computer and this equipment will be disabled.
4) Enable Authentication Trap
Select whether sending a SNMP Traps when this equipment is accessed using SNMP from
a different read community.
5) Enable Alerts Trap
Select whether sending a SNMP Traps when an alert condition occurs.
6) IP Trap Address 1-10
Enter the IP address where the SNMP Traps will be sent. You can specify up to 10
addresses.
7) IP Trap Community
Enter the trap community name for the IP Traps.
8) IPX Trap Address
Enter the IPX address where the SNMP Traps will be sent.
Setting up the Security Service
In Security Service, you can install the certificate for the authentication with the RADIUS server
in the Wireless LAN network, create or install a server certificate to enable SSL for the HTTP
Network Service, FTP Server, and IPP Print Service, and install CA certificates to be used for
SSL of LDAP, SMTP Client, and POP3 Network Service.
P.157 “Installing Certificate for Wireless LAN”
P.159 “Installing Server Certificate”
P.166 “Installing CA Certificate”
— Installing Certificate for Wireless LAN
When you want to set the 802.1x authentication with the RADIUS server for the optional Wire-
less LAN Module (GN-1041), you must install user certificate and CA certificate as required.
y This equipment supports CA certificate and User certificate that are the following encoding
format.
- CA Certificate: DER, BASE64, PKCS#7
- User Certificate: PKCS#12
y This equipment supports md5RSA and sha1RSA certificate. Please make sure to use the
certificate in these algorithms.
For further information about the Wireless LAN, please see Operator’s Manual for Wireless
LAN Module which is included in the CD-ROM for the GN-1041 Wireless LAN Module.
To Next Page
Loading...
Need help?
General
