TopAccess Error Messages 331
2B50
Failed to process image. Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
2B51
Failed to process print image. Make sure that the Function List can be
printed out. Retry the print. If the error still
occurs, contact your service representa-
tive.
2B60
The folder was renamed. A folder of the
same name already existed.
The same named folder cannot be created
in the same box.
2B70
The document was renamed. A document
of the same name already existed.
The same named document cannot be
created in the same box or folder.
2B71
The storage period of e-Filing documents
will expire
Check if necessary documents are stored
in e-Filing. The documents will be deleted
in few days.
2B80
The HDD for storing e-Filing data is run-
ning out of space.
Delete unnecessary documents in e-Filing.
2B90
Insufficient Memory. Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
2BA0
Invalid Box password specified. Make sure that the password is correct
and retry the scan, or reset the password
and retry the scan. When this error occurs
for the print of the data in the e-Filing, per-
form the print with the administrator’s
password. If the recovery is still not com-
pleted or in case of invalid password for
the operation other printing (opening the
file, etc.), contact your service representa-
tive.
2BA1
Incorrect paper size Make sure to specify the supported paper
size.
2BB0 Job canceled (Job was canceled.)
2BB1
Power failure occurred Make sure that the power cable is con-
nected properly and it is inserted securely.
Resend the job.
2BC0
System fatal error. Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
2BC1
Failed to acquire resource. Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
2BD0
Power failure occurred during restoring. Make sure that the power cable is con-
nected properly and it is inserted securely.
Resend the job.
2BE0
Failed to obtain the machine parameters. Turn the power OFF and then back ON.
Retry the scan.
2BF0 Reached the maximum number of pages. Reduce the pages and print again.
Error Code Message Corrective Action
To Next Page
Loading...
