E6582062
4-11 4. [Basic operation] Operation methods of motor
3
4
9
Read the changed parameter in the following procedure.
1 Select "8. Changed parameters search & edit" on
the [Setting mode] screen and press the [OK] key.
The Changed parameters search & edit screen is
displayed.
"U--- Waiting for search" is displayed in the main
area.
2 Press the [F4] key ("F(Next)").
During search, "U--F Forward searching..." is
displayed.
Among the changed parameters, the one with the
smallest 4-digit communication number is
displayed.
The tile, parameter name, and setting value of the
parameter are displayed.
Memo
• Since all the parameters are compared with the default setting values, it may take a few
seconds until parameters are displayed.
• To cancel parameter search, press the [ESC] key.
0.0HzSTOP
14:38
Setting Mode
0
5 Extended parameters (F ---)
6 Advanced parameters (A ---)
7 Communication parameters (C ---)
4 Basic parameters
Top
Monitor
8 Changed parameters search & edit
0.0HzSTOP
14:38
Changed parameters search & edit
U—
Waiting for search
0
Top Return R(Back)
F(Next)
0.0HzSTOP
14:39
Changed parameters search & edit
U–F
Forward searching...
0
Top Return R(Back)
F(Next)
To Next Page
Loading...
