E6582062
5. [Fundamental operation] How to use parameters 5-60
4
5
9
• / display of the rotation direction icon.
• Direction of rotation of the rotating icon
• "Forward"/"Reverse" display of the direction of rotation in [Monitor mode].
When the [FWD]/[REV] key is valid, is displayed at the upper right of the LCD screen.
When the motor is running forward, is highlighted. When it is running reversely, is
highlighted.
Memo
• This function is valid when the motor is run/stopped from the operation panel or extension panel
(<CMOd: Run command select> = "1").
• In the case of terminal run, setting with <Fr: Panel Fwd/Rev run select> is invalid.
Switch forward/reverse run with the terminal [F] and the terminal [R].
Terminal [F]: Fwd run
Terminal [R]: Rev run
For details of terminal run, refer to "Chapter 7".
To Next Page
Loading...
