E6582062
2-15 2. Installation and wiring
2
3
9
10
■ Top cover
1 Remove two screws of the top cover.
Store the removed screws so as not to be lost.
2 Pull the top cover slightly toward you.
The tab shown in the figure on the right comes off.
3 Lift the top cover upward and remove it from the unit.
4 Mount the top cover in the reverse procedure.
2. 2. 4 With frame size A6
VFAS3-2450P, 2550P,
VFAS3-4900PC to 4132KPC
The parts to be removed are as follows.
• Front cover on the lower side of the front surface (metal)
• Transparent cover inside the front cover above (transparent
resin)
• Wiring duct inside the front cover above (black resin)
The top cover is never removed.
To Next Page
Loading...
