Toshiba TOSVERT VF-S11 User Manual

E6581158
F-57
6
1) Selection using parameters
Time [s]
Output frequency [Hz]
FGE
FGEFGE
FGE
C
CC
CEE
EEEE
EE
HJ
HJHJ
HJ
H
HH
H
H
HH
H
H
HH
H
H
HH
H
0
H＝
H＝
H＝
Acceleration/deceleration time 1 is initially set as the default. Acceleration/deceleration time 2 and 3 can
be selected by changing the setting of the H.
Enabled if EOQF= (panel input enabled)
2) Switching by frequencies - Switching the acceleration/deceleration time automatically at the frequency
setting of H.
Title Function Adjustment range Default setting
H
Acceleration/deceleration 1 and 2
switching frequency
0.0-WN 0.0
H
Acceleration/deceleration 2 and 3
switching frequency
0.0-WN 0.0
Note:Acceleration/deceleration patterns are changed from pattern 1 to pattern 2 and from pattern 2 to
pattern 3 in increasing order of frequency, regardless of the order in which frequencies are
changed. (For example, if H is larger than H, H pattern 1 is selected in the fre-
quency range below the frequency set with H. )

Toshiba TOSVERT VF-S11 Specifications

General

Model	TOSVERT VF-S11
Category	Inverter
Output Frequency	0.1-400Hz
Frequency Range	0.1-400Hz
Control Method	V/f Control, Sensorless Vector Control
Power Rating	0.2kW to 15kW
Cooling Method	Forced air cooling
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication	Modbus RTU
Input Voltage	200-240V, 380-480V
Braking Unit	Built-in (optional external braking resistor)