TSAT 3000 - 3.13.1 POW_WAKEUP_FIRST_TIME

TSAT 3000 - Telemetry and data transfer via SATellite
TSAT 3000 Configuration Parameter Description, January 2013 Page 100 of 124
3.13.1 POW_WAKEUP_FIRST_TIME
Ver <= 31.0.1: Default 0, Range –1… 1440
Ver >= 31.1.0: Default 0, Range 0…10080
Ver <= 31.0.1
Not Used.
Ver >= 31.1.0
Controls SLEEP mode operation.
Used when the Main-Unit Power-Save function is enabled by POW_WAKEUP_INTERVAL >= 2.
To let the different RTs wake up to specified time(s) relative to NMS, HUB and RT real time,
this MIB variable will define the first
time Main-Unit is waked up. Range is 0…10080 [minutes]
(that is: 1 minute … 1 week). Some examples:
POW_WAKEUP_
FIRST_TIME
POW_WAKEUP_
INTERVAL
Main-Unit is waked up [hh:mm]
12 60 00:12 – 01:12 – 02:12 - - - 23:12
10 10 00:10 – 00:20 – 00:40 - - - 23:50
1 70 00:01 – 01:11 – 02:21 - - - 23:21
720 1440 12:00 – 12:00 (next day)
3605 10080 Wednesday 12:05 – Wednesday 12:05 (next week)
Default value 0 will make the CURRENT to be replaced by 60 x 12 + NET_RT_ADDRESS – 1.
That will make all RTs to wake up at different
times the first time:
- RT 1 will wake up 12:00
- RT 2 will wake up 12:01
- RT 40 will wake up 12:39