TSAT 3000 - PORT_FORWARD_CHAR [N]

TSAT 3000 - Telemetry and data transfer via SATellite
TSAT 3000 Configuration Parameter Description, January 2013 Page 19 of 124
3.1.12 PORT_FORWARD_CHAR [n]
Default –1, Range –1…255 (0xFF)
Define the ASCII character that shall force an immediate sending of data (including the forward
character) from this
STREAM PORT. Usage is dependent on PORT_TYPE [n].
PORT_TYPE [n]
Value Description
NONE
SERVICE
ADAPTER
NETWORK
n/a Not Used
–1 Forward character facility is disabled.
STREAM
0 … 255 Forward character facility is enabled
.
Note: When a STREAM PORT is connected to Remote-COM via “TSAT Comport Server”, the
Forward-Char value is sent to, and handled by Remote-COM. Packets received from Remote-
COM will be forwarded immediately.