TSAT 3000 - Utl_{Outbound | Inbound}_Prefix

To Next Page

To Previous Page

TSAT 3000 - Telemetry and data transfer via SATellite

TSAT 3000 Configuration Parameter Description, January 2013 Page 110 of 124

3.15.5 UTL_{OUTBOUND | INBOUND}_PREFIX_BYTE

Default 0, Range 0…255 (0xFF)

Ver == 30.0.0:

Not Implemented.

Ver >= 30.1.0:

For debugging and measurement purposes, it’s possible to specify that all Outbound and/or

Inbound packets should be prefixed with a specified byte-value.

Outbound: All Outbound packets are prefixed with UTL_OUTBOUND_PEFIX_BYTE defined at

HUB. It must be set to any non-zero value on all RTs.

Inbound:

All Inbound packets are prefixed with UTL_INBOUND_PREFIX_BYTE defined at the

RTs. It must be set to any non-zero value on the HUB.

Value Description

0 Normal operation. No prefix.

1 … 255 Prefix Outbound and/or Inbound packets with this byte-value.

TSAT 3000 - Utl_{Outbound | Inbound}_Prefix_Byte