TSAT 3000 - 3.11.23 PHL_TX_RT_FREQUENCY_2_BKUP

TSAT 3000 - Telemetry and data transfer via SATellite
TSAT 3000 Configuration Parameter Description, January 2013 Page 90 of 124
3.11.23 PHL_TX_RT_FREQUENCY_2_BKUP
Ver <= 30.4.1: Default 0, Range 0 + 14.000.000…14.500.000 – No-Current
Ver >= 30.5.0: Default 0, Range 0 + 5.000.000…14.500.000 – No-Current
Set the Backup Secondary Inbound carrier [kHz] in a Redundant Multi-Inbound-Link (MIL) network.
Ver <= 30.7.0
Not Used.
Ver >= 30.8.0 + RT DSP >= 2.3.1
HUB: Not Used.
RT: The RT TX frequency to Backup-Slave-HUB in kHz. The RT will switch to send to this
Slave-HUB if it cannot open the link to the Main-Master-HUB.