TSAT 3000 - 3.1.3 PORT_USE_SOCKET [n]; 3.1.4 PORT_USE_COM [n]

TSAT 3000 - Telemetry and data transfer via SATellite
TSAT 3000 Configuration Parameter Description, January 2013 Page 14 of 124
3.1.3 PORT_USE_SOCKET [n]
Default 0, Range 0…32
Set SOCKET connection to this PORT.
Usage is dependent on
PORT_TYPE [n].
PORT_TYPE [n]
Value Description
NONE n/a Not Used when PORT is Closed.
NETWORK n/a Not Used when PORT is connected to IP-STACK.
0 PORT is connected to Local-COM (defined by PORT_USE_COM [n]). STREAM
SERVICE
ADAPTER
1 … 32
PORT is connected to a SOCKET.
Protocol on this SOCKET is defined by
SOCK_TYPE [n].
3.1.4 PORT_USE_COM [n]
Default 0, Range 0…64
Set COM connection to this PORT.
Usage is dependent on
PORT_USE_SOCKET [n] and SOCK_TYPE [n].
PORT_USE_SOCKET [n] SOCK_TYPE [n]
Value Description
0 PORT isn’t connected to any Local-COM.
1 … 8 PORT is connected to Local-COM.
0 n/a
9 … 64 INVALID.
NONE n/a Not Used when SOCKET is Closed.
RAW_DATA
TSAT_NMS
n/a Not Used.
0 PORT isn’t connected to any Remote-COM.
1 … 32
COMPORT_SERVER
1 … 64
PORT is connected to Remote-COM at
“TSAT Comport Server”.